Fixing hole options

3 possible heights measured from lower edge of frame to centre of upper fixing hole:
Preparation for barrier placement = 750mm / 900mm / 1200mm.

Installation tips

NB. The 90mm fixings that carry the external barriers are designed and tested for this purpose. These are supplied loose and must be used.
Apply joint filler in the factory predrilled screw hole before mounting the screw.
Only screw in as deep as instructed, so that you do not damage the inside of the frame. How far in depends on the thickness of the barrier, which can be 12.8mm-18.8mm thick. Consult drawing how far the screw must protrude (34-40mm).
Screw the steel spacer as close to the alu-clad as possible.
Mount the barrier, cf. drawing.
Screw the steel cap onto the screw. Ensure full engagement!
NOTE: Screw the steel spacer outward so it tightens to the barrier. It is okay if there is a gap between the door and the inner bolt.
NOTE: Barriers are not supplied by VELFAC.

VELFAC In

Fittings & Accessories